News Detail

Cameo, deep cameo, ultra cameo - coin grading definitions



Proof coins with highly reflective, mirror-like fields can be described as either cameo (abbreviated to “CAM” on the PCGS certificate) or deep cameo (abbreviated to “DCAM”). CAM and DCAM refer specifically to the degree of contrast between the frosted design and the reflectivity of the proof fields. Proof coins that have both reverse and obverse designs that are highly frosted and contrast strongly with highly reflective fields are described as DCAM. Where the proof fields are highly reflective but the design is not frosted or frosted on only one side of the coin, PCGS assigns a CAM designation to the coin. PCGS will not assign a DCAM or CAM designation to a proof coin if the fields are not highly reflective, even if the design is frosted, which is unlikely anyway, as frosted designs usually accompany reflective fields.

1911 two pound deep cameo
A 1911 £2 gold coin graded PCGS PR65DCAM. Notice the cameo effigy of George V on the obverse and
the deep contrast between field and design on the reverse.

1911 two pound cameo
A 1911 £2 gold coin graded PCGS PR63CAM. Notice how little frosting remains on the obverse and reverse
designs on this coin. Only the coin’s reflective fields have earned this coin a CAM designation.

DCAM and CAM are used exclusively on proof coins. The DCAM or CAM abbreviation is a suffix to the numerical grade of a proof coin, such that a proof gold coin, for example, in grade 65 with highly reflective fields and a frosted design on both sides of the coin is described as PR65DCAM. A proof copper coin with full red in grade, say, 63 that has frosting on only one side of the coin but deeply reflective fields on both sides of the coin is described as PR63RD CAM. A proof silver coin in, say 66 with neither reflective fields nor a frosted design is described simply as PR66. NGC uses the term “ultra cameo” instead of “deep cameo” to describe coins with fully frosted designs and completely reflective fields.

1937 gold two pound
Notice the lack of cameo on the reverse design. Perhaps it’s more obvious in the flesh, but the design
looks glossy and has very little white frostiness to it. The obverse retains a reasonable amount of “frostiness”.
The coin is graded PCGS PR64CAM.

These days, modern mints such as the Royal Australian Mint or the Royal Mint in London produce high-quality proof coins that mostly, if not always, grade up as DCAM. It would be unusual for a modern mint to issue a proof coin without adequately preparing the dies for production, although I do know of at least one instance where the Royal Mint issued a proof sovereign without polishing the reverse die. The dies produced a non-cameo reverse with full cameo obverse. A modern proof coin that becomes impaired in some way, by being circulated, for example, will also lose its “DCAM” or “CAM” designation over time; as the design wears away, so does the reflectivity of the fields. Some of our first decimal proofs from 1966 were struck from dies that had lost their “frostiness”, resulting in semi-frosted or unfrosted designs on the coins they struck. These coins have graded up as CAM. Meanwhile, many milled gold proofs from the United Kingdom grade up as DCAM or CAM—with the exception of the proof issues of 1902, which were all struck from sandblasted dies and resulted in coins with a matte appearance. The proofs of 1937, in particular, are known for their cameo portraits but unfrosted reverses—which would grade CAM by PCGS. Despite their expertise at producing deeply cameo gold proofs since the early 1800s, the Melbourne and Perth mints did not produce any silver or copper coins with the cameo effect. The reason behind this is perhaps worth further research.

1989 proof sovereign
A proof 1989 gold £2 or double sovereign in glorious PCGS PR69DCAM—which is more-or-less perfect.
The fields are highly reflective and appear to be pitch black when photographed.

1956 proof shilling
This 1956 shilling is graded PCGS PR65. It does not have a cameo appearance. In fact, no pre-1963 Australian silver
or copper coins have a cameo strike. Only from 1966 onward did the Royal Australian Mint issue proof coins with cameo fields.

As a final note, PCGS uses a different set of terms to describe a mirror finish to a non-proof or currency-issue coin. Proof-like coins (described as “PL” on the PCGS certificate) have proof-like fields. The exact definition of a proof-like coin, taken from the PCGS website, is that the coin exhibits a “clear reflection in the fields on both sides from 5 to 10 centimetres away”. Very proof-like coins with highly reflective fields are described as deep mirror proof-like (abbreviated to DMPL). The exact definition, quoted from the PCGS website, is that the coin exhibits “clear reflection in the fields on both sides of the coin from at least 15 centimetres away”. The terms are specifically used on United States Morgan dollars, and may be used on other types of United States coins as well. I haven’t seen the terms DMPL used on foreign coins, but have owned several world coins that bore the PL designation.

For more information, buy yourself a copy of the “The Official Guide to Coin Grading and Counterfeit Detection” by Scott Travers.

Popular PCGS and NGC-graded Coins